Wastewater basin
Level measurement in the wastewater basin
过程数据
测量任务:
Level measurement
测量点:
Open basin
测量范围至:
0 … 3 m
介质:
Wastewater
过程温度:
+10 … +30 °C
过程压力:
0 … 0 bar
特殊挑战:
Aggressive media
应用范围
The wastewater created in the power plant is collected in a basin and fed into a treatment system. This is where wastewater from the chemical treatment, the slag cooling, the sanitary facilities as well as surface water and oil contaminated fluids are neutralised and treated. Immersion proof sensors are needed to measure the levels of these large amounts of water in the basins reliably and accurately.
建议的产品
解 1
解 2

VEGAPULS C 21
Thanks to its encapsulated housing design, the radar instrument measures the level reliably in all weathers and surface conditions, even if submersed
- Precise measuring results, even with strong foam generation
- Maintenance-free, non-contact measurement and high protection IP 68
- Reliable measuring results despite changing environmental conditions
量程 - 距离
15 m
过程温度
-40 ... 80 °C
过程压力
-1 ... 3 bar

VEGAWELL 52
Hydrostatic level measurement for continuous monitoring of the water level in the basin
- Long-term stability ensured by oil-free, ceramic-capacitive CERTEC® measuring cell
- High overload resistance ensures reliable measurement at all times
- Simple installation from the top or side
量程-压力
0 ... 60 bar
过程温度
-20 ... 80 °C
过程压力
-
关闭