Ash silo
Level measurement and point level detection in the ash silo
|
|
过程数据
测量任务:
Level measurement and point level detection
测量点:
Silo
测量范围至:
25 m
介质:
Ash
过程温度:
+80 … +120 °C
过程压力:
0 … +1 bar
特殊挑战:
Dust and noise, material cones and angles, poor reflective properties
应用范围
Large quantities of fibre waste are produced during paper production. These are dried and burned and the energy released during combustion is used as process heat or to generate electricity. The ash is stored in high silos to be later used as an additive in the building materials industry. When the ash silo is filled, a great amount of noise and dust is generated and the material forms large angles of repose and overhangs. Filling, emptying and transportation logistics are controlled through the level measurement system.
您的获益
Reliable
Reliable readings in spite of difficult measuring conditions
Cost effective
Maintenance costs removed by air cleaning of antenna
User friendly
One radar sensor for all silo sizes, simple to install
建议的产品
VEGAPULS 6X
Radar level measurement for controlling the filling and emptying process in the ash silo
- Reliable measurement under difficult process conditions
- Easy alignment of the sensor with swivel mount and sensor app
- Good focusing allows retrofitting of sensor at any position
量程 - 距离
120 m
过程温度
-196 ... 450 °C
过程压力
-1 ... 160 bar
VEGACAP 64
Capacitive point level detection for overfill protection
- Reliable switching signals even under difficult process conditions
- Function unaffected by buildup
- Long service life thanks to robust construction
量程 - 距离
-
过程温度
-50 ... 200 °C
过程压力
-1 ... 64 bar
关闭