Incinerator
Measurement of waste layer thickness and air flow in the incinerator
过程数据
测量任务:
Pressure and level measurement
测量点:
Incinerator
测量范围至:
30 m
介质:
Burning household and commercial waste
过程温度:
+20 … +1000 °C
过程压力:
0 … 0 bar
特殊挑战:
Extremely high temperatures, measurement through open flames
应用范围
To ensure that the waste burns completely, temperatures up to 1000 °C must be maintained. For this purpose, large amounts of primary air from below and secondary air from above are blown in. Air quantity and air pressure must be precisely measured. Also an optimum waste layer thickness on the combustion grate is required for uniform combustion.
您的获益
Reliable
Reliable measurement of the layer thickness and air flow, even at high combustion temperatures
Cost effective
Continuous operation and uniform combustion
User friendly
Maintenance-free measurement
建议的产品
VEGABAR 82
Pressure transmitter for measurement of the combustion air
- High overload and vacuum resistance
- Long-term stability via dry measuring cell
- High measurement accuracy, even with very small measuring ranges
量程 - 距离
-
量程-压力
-1 ... 100 bar
过程温度
-40 ... 150 °C
VEGADIF 85
Measurement of flow rate and pressure of the combustion air using differential pressure transmitter
- Exact measurement, even with very small pressure differential
- High overpressure and vibration resistance thanks to integrated overload diaphragm
- Universally applicable, with a wide selection of measuring ranges and process fittings
- High operational reliability through SIL 2/3 sensor
量程-压力
-40 ... 40 bar
过程温度
-40 ... 105 °C
过程压力
-1 ... 400 bar
VEGAPULS 6X
Non-contact level measurement with radar in the incinerator
- Accurate measurement and precise feed control
- High plant availability thanks to wear and maintenance-free instrumentation
- Unaffected by smoke, dust and noise
量程 - 距离
120 m
过程温度
-196 ... 450 °C
过程压力
-1 ... 160 bar
关闭