Storage towers
Level measurement in storage towers
过程数据
测量任务:
Level measurement
测量点:
Storage tower
测量范围至:
30 m
介质:
Paper suspension
过程温度:
+20 … +50 °C
过程压力:
0 … 0 bar
特殊挑战:
Steam generation, agitated surface due to pump operation
应用范围
Large quantities of prepared stock are needed to keep a paper mill running continuously. This material is stored in high storage towers. They are characterised by their large material throughput and agitators that ensure the homogeneity of the stock. Inside, the warm stock generates lots of steam and the pumping and stirring processes make the surface very turbulent. Reliable level measurement ensures a continuous supply of stock and prevents the agitator from running dry.
您的获益
Reliable
Reliable measurement despite steam and changing stock temperatures and densities
Cost effective
Optimal utilization of the container volume
User friendly
Simple installation and setup
建议的产品

VEGABAR 82
Hydrostatic level measurement as dry run protection for the agitator
- Front-flush installation in ball valve fitting
- Installation and removal without emptying storage tower
- Long-term stability thanks to dry measuring cell
量程 - 距离
-
量程-压力
-1 ... 100 bar
过程温度
-40 ... 150 °C

VEGAPULS 6X
Level measurement with radar in storage towers
- Non-contact, maintenance-free level measurement
- Reliable measurement, unaffected by steam
- Very good beam focusing enables exact measurement, even with heavy deposits on the silo walls
量程 - 距离
120 m
过程温度
-196 ... 450 °C
过程压力
-1 ... 160 bar
关闭