Storage tanks for chemicals and auxiliary substances
Level, switching and pressure measurement in storage tanks
|
|
过程数据
测量任务:
Level and pressure measurement, point level detection
测量点:
Tank
测量范围至:
4 m
介质:
Chemicals and auxiliaries
过程温度:
+10 … +95 °C
过程压力:
0 … 0 bar
特殊挑战:
Aggressive, gas producing media
应用范围
The targeted addition of chemicals and auxiliary substances influences the properties and quality of the paper. Common additives are hydrogen peroxide as well as alkalis, acids and fillers. These chemicals and additives are sometimes aggressive, produce vapours and are at temperatures of up to 95 °C. This means they are often stored in stainless steel or glass fibre reinforced plastic containers. Level and pressure measurements are essential for the safe filling and emptying of the storage tanks and for dry run protection of pumps.
您的获益
Reliable
Reliable, product-independent measurement
Cost effective
Optimal utilization of the container volume
User friendly
Simple installation and setup
建议的产品
VEGAPULS 6X
Non-contact level measurement with radar in storage tanks
- Wear and maintenance-free through non-contact measurement
- Suitable for all media and container types
- High chemical resistance via PTFE-encapsulated antenna system
量程 - 距离
120 m
过程温度
-196 ... 450 °C
过程压力
-1 ... 160 bar
VEGABAR 39
测量压力，以保护化学品泵，避免其空转
- 耐化学品侵蚀的过程膜
- 与正面齐平的嵌入式小型过程接口
- 当超过/低于压力限值时，开关信号可调
- 通过 LED 灯环来醒示压力范围
量程-压力
-1 ... 1000 bar
过程温度
-40 ... 130 °C
测量精度
0,3 %
VEGASWING 63
Vibrating level switch as overfill protection in the storage tank
- Overfilling of the container is reliably prevented
- WHG-approved instrument ensures legal certainty
- Simple WHG (function) test via keystroke
过程温度
-50 ... 250 °C
过程压力
-1 ... 64 bar
型式
标准
Hygienic applications
with gas-tight leadthrough
带管延长件
with temperature adapter
关闭